Effectiveness of the Developed Hot-work Chair Prototype for Hot-work Workers: A Preliminary Study in the View of Ergonomics
Main Article Content
Abstract
Introduction: Workers in a selected company currently performing hot work using inade-quate seating tools expe- rience prolonged static and awkward body postures, leading to mus-cle discomfort and pain, especially in the but- tocks, lower back, thighs, and other areas. This research aims to assess and compare the level of muscle discomfort between the control group, which continued their existing practices, and the experimental group, which used the newly developed hot work chair. Methods: The effectiveness of the hot work chair was evaluated using pre-test and post-test questionnaires, including a body discomfort chart assessed with a 100-millimeter Visual Analogue Scale (VAS). A total of 24 respondents were divided into two groups, with 12 respondents in each (control and experimen- tal groups). The experimental group used the hot work chair, while the control group maintained their usual seating practices. Pre-tests and post-tests were conducted to assess muscle discomfort ratings before and after using the hot work chair. Results: Data analysis using the Wilcoxon Signed-rank test revealed a significant difference in the overall discomfort rating for the ex-perimental group between pre-test and post-test (Z = -3.062, p = 0.002). Conversely, there were no significant differences for the control group workers between pre-test and post-test for the specified body regions. Notably, the highest discomfort ratings, such as buttocks, were reduced from 77.50 ± 4.78mm to 37.00 ± 4.13mm during the post-test. The experimental group showed an overall discomfort rating reduction of 49% after using the hot work chair. The chair’s seat, backrest, and knee support feature contoured cushions that adapt to various body postures, allowing multiple seating positions for users based on their requirements and working envi- ronment. Conclusion: The introduction of the hot work chair effectively re-duced muscle discomfort during extended hot work activities and improved body postures, thereby potentially reducing the risk of muscle discomfort leading to musculoskeletal disor-ders and other work-related injuries.
Downloads
Article Details
References
American Conference of Governmental Industrial Hygienists. Industrial Ventilation. A Manual of Recommended Practice. doi:10.1002/9780470114735.hawley00629
Kushwaha DK, Kane PV. Ergonomic assessment and workstation design of shipping crane cabin in steel industry. International Journal of Industrial Ergonomics, 2016; 52: 29-39. doi:10.1016/j. ergon.2015.08.003
Chaudhary R, Kapahi M, Verma M, Srivastava R. Combined Study of Welding Work and Ergonomics Risk Analysis Process. International Journal of Computer Science and Communication Engineering IJSCE.2 021; 56-59. doi:10.1017/ cbo9781316217771.011
Ruchi C, Ajit, Meena K, Manisha V. Combined Study of Welding Work and Ergonomics Risk Analysis Process. International Journal of Computer Science and Communication Engineering IJCSCE Special issue on “Emerging Trends in Engineering”, ICETIE 2012. doi:10.1109/incoset.2012.6513967
Mahendra K, Virupaksha H, Thimmana G. “Ergonomic Analysis Of Welding Operator Postures”, International Journal of Mechanical and Production Engineering (IJMPE). 2016;4(6): 9-22. doi:10.23880/eoij-16000255
Corlett, E.Static muscle loading and the evaluation of posture. In CRC Press eBooks 2005. (pp. 453– 496). doi:10.1201/9781420055948.ch16
Elvis, C., France, N., & Patience, E. Risk factors for work-related musculoskeletal disorders among welders in the informal sector under resource constrained settings. Work (Reading, Mass.), 2022;72(1):239–252. doi:10.3233/WOR-205275
Das, B. Industrial Workstation and Workplace Design: An Ergonomic Approach in Industrial Ergonomics: Case Studies, Industrial Engineering and Management Press, Nor- cross Georgia, 1991;115-139. doi:10.1016/0003-6870(96)00008- 7
Commission, G. B. H. a. S. Health and safety statistics: 1995/96. doi:10.1136/qshc.4.1.68-a
Bernardo, F., Martins, R., & Guedes, J. Muscle
fatigue assessment in manual handling of loads using motion analysis and accelerometers: A short review. In CRC Press eBooks 2018; (pp. 67–71). doi:10.1201/9781351008884-12
Pugh, S. (1991). Total Design: Integrated Methods for Successful Product Engineering. Addison Wesley Publishing Company. doi:10.1002/ qre.4680070210
Ruchi C, Ajit, Meena K, Manisha V, (2012). Combined Study of Welding Work and Ergonomics Risk Analysis Process. International Journal of Computer Science and Com- munication Engineering IJCSCE Special issue on “Emerging Trends in Engineer-ing”, ICETIE 2012. doi:10.1109/ incoset.2012.6513967
Genaidy, A.M., Huston, R.L., Dionysiou, D.D., & Karwowski, W. (2017). A System-of- Systems Framework for Improved Human, Ecologic and Economic Well-Being. Sustainability, 9, 616. doi:10.3390/su9040616
Dahlstrom, D. L., & Bloomhuff, A. (2014). ACGIH® (American Conference of Govern- mental Industrial Hygienists). In Elsevier eBooks (pp. 178–179). doi:10.1016/b978-0-12-386454-3.00584-4
Griego A. Sitting posture: an old problem and a new one. Ergonomics, 1986; 29(3):345–362. doi:10.1080/00140138608968270
Sovella Human Workspace, Retrieved from sovella-Ergonomics-E-book- 2016_final_AssemblyMag.pdf. doi:10.1016/b978-0-444-87441-2.50001-7
Donnelly CJ, Callaghan JP, Durkin JL. The effect of an active lumbar system on the seating comfort of officers in police fleet vehicles. International Journal of Occupational Safety and Ergonomics, 2009;15(3):297-307. doi:10.1080/10803548.200
11076809
Mohammad Yusof NAD, Karupiah K, Mohd Tamrin SB, Rasdi I, How V, Sambasivam S, Mohamad Jamil PAS, K C Mani K, Sadeghi Naeini H, Mohd Suadi Nata DH. Effectiveness of lumbar support with built-in massager system on spinal angle profiles among high-powered traffic police motorcycle riders: A randomised controlled trial. PLoS One. 2021;16(10):e0258796. doi: 10.1371/ journal.pone.0258796. PMID: 34665845; PMCID: PMC8525748.
Oanh Nguyen, (2016). Ergonomics in Welding, Retrieved from Tulsa Welding School website. https://www.weldingschool.com/blog/category/ welding/
Van Niekerk, S. M., Louw, Q. A., & Hillier, S. (2012). The effectiveness of a chair inter- vention in the workplace to reduce musculoskeletal symptoms. A systematic review. BMC musculoskeletal disorders, 13, 145. doi;10.1186/1471-2474-13-145
Tang CY, Chan W, Tsui CP. Finite element analysis of contact pressures between seat cushion and human buttock-thigh tissue. Engineering, 2010;2(09):720. doi:10.4236/eng.2010.29093
Tahmasebi R, Anbarian M, Torkashvand S, Motamedzade M, Farhadian M. Design and evaluation of an ergonomic chair for near-ground welding based on muscle activity and usability. Work (Reading, Mass.), 2020;66(1):85–93. doi:10.3233/wor-203153
Cham R, Redfern, MS. Effect of Flooring on Standing Comfort and Fatigue. Human Factors: The Journal of the Human Factors and Ergonomics Society 2001;43(3): 381-391. doi:10.1518/001872001775898205